01
Green Laser Marking Machine—FRZ-LMG
Equipment Introduction
? International first-class quality green laser marking machine, within reach! Some materials have high absorption rates for green light with a wavelength of 532nm, so green laser has good adaptability to these materials. The focused spot of green light is extremely small, and the processing heat affected zone is minimal, making it more suitable for ultra-fine marking of materials such as glass and plastic;
? Adopting high-performance imported green laser, the laser beam quality is superior, bringing users almost perfect marking effect;
? The option to use a rotating dual workstation worktable greatly reduces the loading/unloading time, resulting in a doubling of customer value within the same time;
? Equipped with safety protective covers that meet export standards and have passed CE certification, to avoid personal injury caused by equipment operators' misoperation and minimize safety risks;
? Adopting a water cooling system.
Application areas
The Friends brand green laser marking machine is used for fine marking, cutting, and microfabrication of special materials. It is mainly used for marking and surface treatment of various materials such as glass, LCD screens, textiles, thin ceramics, semiconductor silicon wafers, IC grains, sapphire, polymer films, etc.
Technical parameters
| Equipment Model | FRZ-LMG7 | FRZ-LMG10 | FRZ-LMG20 |
| Average output power(W) | 7W □ | 10W □ | 20w □ |
| Wave Length | 532nm | ||
| Maximum sculpture speed | 7000mm/s | ||
| Repetition frequency range | 20-200KHz | ||
| Marking area | 70mm*70mm、110mm*110mm、150mm*150mm、175mm*175mm、200mm*200mm、310mm*310mm(可選Optional) | ||
| Min character height | 0.06mm | ||
| Minimum line width | 0.03mm (Depend on material) | ||
| Environmental temperature | 10°C-35°C | ||
| Power supply | AC220V/50Hz; 1.5KW | ||
| Cooling mode | Water cooling | ||
| Shields | Optional | ||
| Purifier | Optional | ||
Equipment pictures
Samples pictures
IC Heat-Sink Marking
